Sunday, 8 November 2015

A STABLE YARD, CHURCH & HIGH WALLS FOR NORMANDY.




It has been a month since my last post but as you will see, I have been busy.

My last post was the 'grounds for the Chateau' but I had still needed to finish it off with the stable yard. The stable itself is a resin building from 'Total Battle Miniatures' along with a lovely church that they do. Whilst making the stable yard, I thought I just as well make a church yard at the same time. As I had my terrain hat on, I made a load of high walls which I will be needing for the 'Too Fat Lardies' Pint Size Campaign, Kampfgruppe Von Luck.
      
The method for making this lot is very similar to how I made the grounds for the chateau in my last post, so I will not repeat myself here but just let the pictures do the talking.

THE WALLS.



 The above picture shows a 28mm Wargames Foundry figure for scale. I have also done some damaged sections of wall so that I can change them around when needed.

THE BUILDINGS.

The roofs lift off and lots of lovely detail inside.


THE BASES.


The church gates and memorials are made by 'Ainsty Castings' and the gravestones are by 'Renedra'. You get two plastic sprues of gravestones by Renedra but I only used the one set, as I didn't want to overcrowd the church yard and needed to leave enough room for figure placement when gaming.

THE STABLE YARD.


 
The stables will now bring 'The Grounds for the Chateau' up to 42 x inches deep, 5 x base sections measuring 16inches wide by 8 x inches deep, plus a 2 x inch cobbled road.





The stables and cobbled road can also fit nicely on the side of the chateau if I need to keep the overall length of the terrain piece down, or it can just be used as a stand alone base.




THE CHURCHYARD.




Again, a 28mm figure in the above pictures to give an idea of scale.

The gravestone sprue also comes with a raven which you can attach to one of the gravestones, which is a nice touch. 

SOMEWHERE IN NORMANDY.



































 
Posted by at
Labels: , ,

32 comments:

  1. Phil8 November 2015 at 08:06

    Busy, you've been busy, no doubt...Splendid and realistic! Thanks, many thanks to share with us your fantastic job...

    ReplyDelete
  2. Hobbyworker8 November 2015 at 08:20

    All i can say is WOW! Stunning work Sir!

    ReplyDelete
  3. Dalauppror8 November 2015 at 08:23

    I'm so impressed by your terrainbuilding skills!!! Stunning work every time! Would be a joy to have a game on such lovely set up gaming board!

    Best regards Michael

    ReplyDelete
  4. James8 November 2015 at 08:28

    Complete rubbish! You need to pack it all up and mail it to me, I'll take care of it.
    Honest.
    ;-)

    ReplyDelete
  5. Michael Awdry8 November 2015 at 08:37

    Pat, you really are a talent, this is just sensational!

    ReplyDelete
  6. Christopher(aka Axebreaker)8 November 2015 at 08:43

    Yet another Tour de Force in building a fantastic wargames table full of lovely terrain! You could make your own book on how to build wargames terrain. In fact I wouldn't be surprised if you already started.;-)

    Christopher

    ReplyDelete
  7. Silver Whistle8 November 2015 at 09:24

    Thanks chaps.

    ReplyDelete
  8. Juan Mancheño8 November 2015 at 11:39

    Wonderful, simply wonderful. You are a great artist!!!

    ReplyDelete
  9. Simon Quinton 8 November 2015 at 12:08

    What a wonderful sight! Fabulous artistry of it all!

    ReplyDelete
  10. NW Crew8 November 2015 at 12:58

    It just keps getting better and better. Your collection is nothing short of sensational! Great work yet again. /Mattias

    ReplyDelete
  11. Greg8 November 2015 at 13:15

    Brilliant work. A+

    ReplyDelete
  12. Jim Jackaman8 November 2015 at 15:34

    Lovely...looks like a damp autumn day in Brittany (where my wife come from). Really like the weathering on the walls and the use of vegetation, brambles, grass and so on. All very atmospheric!

    ReplyDelete
  13. Ray Rousell8 November 2015 at 15:35

    Mouth watering terrain Pat!!! What more can I say???

    ReplyDelete
  14. Jay White8 November 2015 at 19:33

    Truly the best or among the best layouts on this planet.

    ReplyDelete
  15. Vinnie8 November 2015 at 20:15

    Incredible set up and the buildings are amazing. Great work

    ReplyDelete
  16. JOHNBOND8 November 2015 at 20:34

    You have great skill Pat, your terrain reproduction is outstanding. love the crow on the tombstone, nice touch.

    ReplyDelete
  17. Chris Cornwell8 November 2015 at 23:39

    Amazing work

    ReplyDelete
  18. Eric the Shed9 November 2015 at 00:14

    stunning

    ReplyDelete
  19. Stefan (aka. Monty)9 November 2015 at 00:26

    Usually I'm not at a loss for a comment but this time I'm simply delighted with your work beyond words. Each and every piece is excellent for itself but the combination makes it a simply perfect looking table!

    Thanks so much for sharing the inspirational pictures.

    Cheers
    Stefan

    ReplyDelete
  20. Rodger9 November 2015 at 01:14

    Stunning work again Pat. Your photos are so inspirational! Thanks.

    ReplyDelete
  21. Service Ration Distribution (Hobby)9 November 2015 at 01:59

    I just put it up on screen and drool. That's some talent you've got there.

    ReplyDelete
  22. Bedford9 November 2015 at 09:41

    Stunning stuff!!!

    lots of ideas to mull over after viewing the scenic items :>)

    Darrell.

    ReplyDelete
  23. Paul Howes9 November 2015 at 16:13

    Outstanding Work! A real pleasure to view and pass on. Beano Boy

    ReplyDelete
  24. Paul´s Bods10 November 2015 at 09:51

    Brilliant!

    ReplyDelete
  25. DHC Wargames11 November 2015 at 07:06

    Wow, magnificent work as always!

    ReplyDelete
  26. Moiterei_198413 November 2015 at 09:15

    The 'master of terrain' itself has worked his magic again! Your's one of the few blogs I come back to time and again even without there beeing a update.

    ReplyDelete
  27. WeRT16 November 2015 at 02:13

    What did you use as a base for wall sections? Those black thin parts?
    As always stunning and amazing works.

    ReplyDelete
    Replies
    1. Silver Whistle17 November 2015 at 08:26

      Thanks again chaps.

      WeRT, the black thin parts that I used for the base, is a sheet of plasticard cut to appropriate size.

      Delete
  28. Jason Meyers17 November 2015 at 22:48

    Inspiring stuff as always. You definitely raise the bar on this blog.

    ReplyDelete
  29. Unknown20 January 2016 at 14:57

    Incredible as always.
    As always an inspiration to everything I do in the hobby.
    Thanks for shearing as always.

    ReplyDelete
  30. Silver Whistle21 January 2016 at 02:20

    Thanks again chaps.

    ReplyDelete

Note: only a member of this blog may post a comment.

Subscribe to: Post Comments (Atom)